The pneumatic booster pump utilizes low-pressure gas at the large piston end to drive and generate high-pressure fluid at the small piston end. It can be used to compress air and other gases, and the output pressure can be steplessly adjusted by driving the pressure.
Large output flow rate: Only 0.3-0.69MPa compressed air drive is required to obtain a large output flow rate. Automatic pressure maintaining: During operation, the pump quickly reciprocates, and as the output pressure approaches the set pressure value, the reciprocating motion speed of the pump slows down until it stops. And maintain this pressure, where the energy consumption is minimal, no heat is generated, and no parts move. When the pressure balance is broken, the pneumatic booster pump automatically starts working to the next balance.
Easy maintenance: The pneumatic booster pump has fewer parts and seals, making maintenance simple and cost-effective. All "O" rings and vulnerable parts of the same series of pumps can be replaced with each other in the repair kit, greatly reducing maintenance costs. The pneumatic booster pump has been lubricated before leaving the factory, and does not require external lubrication during operation.
Maintaining hydraulic pressure without consuming energy
With explosion-proof function, no need for power or wire connection
Compact structure, light weight, unaffected by weather changes, easy to achieve automatic control
The output static pressure is adjusted by the driving air pressure
Output pressure up to 80000PSI
It is very easy to start and stop at full load
Easy to install and operate